Charnwood DS16/32 Drum Sander 16″ Width CapacityAfter planing timber, the drum sander can be used to complete the finishing process. The work piece is fed through the sander on a powered conveyor belt with a variable speed control to achieve an optimum finish on all timber types.16″ Sanding Width in a Single Pass32″ Sanding Width using 2 PassesVariable Speed Feed ConveyorExtension Beds IncludedFloor Stand IncludedWheel Kit IncludedDS16/32 Drum Sander 16″ Width CapacityAfter planing timber, the drum sander can be used to complete the finishing process. The work piece is fed through the sander on a powered conveyor belt with a variable speed control to achieve an optimum finish on all timber types.The single pass capacity of the machine is 405mm (16″). However, by removing the side plate (which is fitted with a quick removal mechanism) the work piece can be fed through the now open end of the sander giving a capacity of up to 810mm (32″) by making 2 passes.Extension beds on each end of the conveyor belt increase support to the work piece and allow longer lengths of board to be sanded by one person. Perfect for upcycling old floor boards and scaffold planks.The height of the sanding drum is adjusted using a large hand wheel and the position read off the scale, which is graduated in both millimetres and inches.Changing the sandpaper wrap is a simple task which requires no tools. Our sanding wraps are pre-cut, with a taper at each end, which is clamped into opposite ends of the drum. If you are using a sandpaper roll, you will need to make a template and cut the tapers before fitting.Mobility is no problem thanks to the wheels and lifting handles provided.Supplied with a fitted 80 grit sanding wrap, floor stand, wheels & lifting handles, dust port elbow, 2.0m cable and UK 3 pin plug.We recommend wearing a face mask or respirator during all sanding operations, even if a dust extraction system is in place. Don’t take chances with your health.You can see more sanders HERESpecificationValueMaximum Width (1 Pass)405mm (16″)Maximum Width (2 Passes)810mm (32″)Maximum Workpiece Thickness80mm (3″)Minimum Workpiece Thickness5mm (1/5″)Minimum Length65mm (2.6″)Maximum Removal0.8mm (1/32″)Drum Motor (Induction)1100w (1.5hp), 240v, 50hzDrum Speed1440rpmDrum Size (Diameter / Length)132mm / 410mmConveyor Motor (DC)50w (1/15hp)Conveyor Speed (Variable)0-3.5 m/minDust Port Diameter100mmWrap Width78mmWrap Length2420mmDust Collection Minimum Requirement1000m3/hour (50 Litres per second)Assembled Dimensions (WxDxH) Without Extensions1050mm x 590mm x 1140mmAssembled Dimensions (WxDxH) With Extensions1050mm x 1040mm x 1140mmShipping Dimensions (WxDxH)930mm x 630mm x 610mmWeight (Net/Gross)83kg / 126kgAssembly Time Required30 minutes (Requires 2 people)RatingLight TradeProduct Guarantee5 Years
